PU insulation round 1000L water tank for solar
hot water storage
Volume: 1-10CBM.
Type: weld round type.
With PU insulation in the middle of two layer of panel.
Volume | 500-10000L |
Material | SS304/PU/SS201 |
Application | hot water/drinking water storage |
Features:
1. The inner box of the insulated water tank is made of stainless steel. The outer box can be made of stainless steel or aluminum or zinc.
2. Polyurethane foam insulation layer as a whole, with low heat loss and good insulation effect.
3. The joint is welded with high frequency resistance seam welding to ensure that it is not easy to rust and leak.
Principle:
The insulation water tank refers to that it USES some kind of insulation material, such as the insulation cup, inside to make the core layer, and then USES the stainless steel water tank as the inner surface layer, while the outer layer is made of ordinary stainless steel plate.These three kinds of materials combine together, it is a most suitable the most outstanding combination, formed stainless steel heat preservation water tank preliminarily so.Therefore, the insulating water tank is composed of three layers, core layer, inner layer and outer layer.
The insulation medium of the core layer can be made of 50mm or 80mm polyurethane foam, polystyrene, PEF, etc.The inner layer is stainless steel, so the better quality SUS304 food grade stainless steel plate and galvanized plate should be used.Finally, the outer layer is generally selected by the material is a relatively common stainless steel stamping film block or plate, you can choose SUS304 stainless steel or SUS201 stainless steel to make!The thickness of the water tank plate can be determined according to the size and height of the water tank. Insulation materials can also choose asbestos or rock wool for insulation.